D's Air & Heating, Inc.

Weil-McLain Oil Boiler Installation Chicago

Don't 'FREEZE' — Call D's!

Weil-McLain · Chicago Oil Boiler Installation

Weil-McLain Oil Boilers

Steam and hot-water oil boilers for Chicago homes with existing oil heating infrastructure. SGO, WGO, WTGO, and Ultra Oil — all installed by D's Air & Heating, Inc.

A $95.35 Service Call Fee is Required for All Service Appointments, Including Warranty Claims.

Weil-McLain Oil Boiler Series

SGO® Series 4

Weil-McLain SGO Series 4 oil steam boiler

Oil-fired steam boiler. 82% AFUE, Category I venting. Ideal for single-pipe and two-pipe steam systems in Chicago homes.

Ultra® Oil

Weil-McLain Ultra Oil boiler

High-efficiency oil hot-water boiler. 87% AFUE — the highest in the Weil-McLain oil lineup. Category I venting.

WGO® Series 4

Weil-McLain WGO Series 4 oil hot-water boiler

Cast-iron oil hot-water boiler. 86% AFUE, Category I venting. Proven reliability for Chicago homes with oil heating.

WTGO® Series 4

Weil-McLain WTGO Series 4 oil hot-water boiler

Cast-iron oil hot-water boiler with tankless coil option. 86% AFUE, Category I venting.

*Local taxes may apply. Financing available on approved credit.

Why D's Air & Heating, Inc. Installs Weil-McLain Oil Boilers

Steam & Hot-Water Options

Weil-McLain offers both oil steam (SGO) and oil hot-water (WGO, WTGO, Ultra Oil) boilers for Chicago homes.

Cast-Iron Durability

Cast-iron heat exchanger sections built to last 30–50 years with proper maintenance.

Category I Venting

Compatible with standard Category I venting — works with most existing oil boiler flue configurations.

Chicago-Proven

Oil boilers remain a reliable choice for Chicago homes with existing oil heating infrastructure.

Up to 87% AFUE

The Ultra Oil reaches 87% AFUE — the highest efficiency in the Weil-McLain oil lineup.

Weil-McLain Warranty

Backed by Weil-McLain's limited warranty. D's Air & Heating, Inc. registers at startup.

All Weil-McLain Oil Boiler Models — Specs

ModelTypeEfficiencyBTU/hrVentingInstalled Price
SGO® Series 4 Oil Steamoil steam82% AFUE105,000–420,000Category IGet a Free Estimate
Ultra® Oiloil hot water87% AFUE85,000–210,000Category IGet a Free Estimate
WGO® Series 4 Oil Hot Wateroil hot water86% AFUE105,000–420,000Category IGet a Free Estimate
WTGO® Series 4 Oil Hot Wateroil hot water86% AFUE105,000–420,000Category IGet a Free Estimate

*Local taxes may apply. Financing available on approved credit.

No Contracts · No Gimmicks

Ready to Replace Your Oil Boiler?

D's Air & Heating, Inc. installs Weil-McLain oil boilers throughout Chicago and the southwest suburbs. Call now or book online.

Chicago Heating & Cooling Done Right.  ·  Don't ‘FREEZE’ Call D's...

Why Chicago Homeowners Trust D's Air & Heating

Licensed & Insured

IL License #2183457

Serving Chicago

Since 2009

Authorized Dealer

Multiple Brands

No Contracts

Ever — Guaranteed

Permit Pulled

Every Installation

Professional Standards

Code-Compliant Work

EPA Certified

Mainstream Engineering

R-410A Certified

Mainstream Engineering

Why Choose D's Air & Heating, Inc.?

Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.

Experience Since 2009

D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.

Manufacturer-Trained Technicians

Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.

Licensed, Insured & Permitted

D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.

Honest Recommendations

We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.

Local Chicago Expertise

We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.

Long-Term Customer Support

Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.

Steam Boiler Expertise — What Chicago Building Owners Should Know

How a Steam Heating System Works

A steam boiler heats water to 212°F, producing steam that rises naturally through supply pipes to cast-iron radiators throughout the building. As the steam gives up its heat, it condenses back to water and returns to the boiler by gravity. One-pipe systems use the same pipe for both steam supply and condensate return. Two-pipe systems use separate supply and return lines, allowing better control and zoning.

The Hartford Loop — Why It Matters

The Hartford Loop is a critical safety piping arrangement on steam boilers. It prevents the boiler from losing its water level if a return pipe develops a leak. Without a properly installed Hartford Loop, a pipe failure can drain the boiler dry, causing catastrophic damage. D's Air installs the Hartford Loop correctly on every steam boiler installation.

Steam Boiler Sizing — EDR Calculations

Steam boilers are sized by Equivalent Direct Radiation (EDR) — the total radiation capacity of all the radiators in the building. The boiler must be sized to match the connected radiation, not the building's heat loss. An oversized steam boiler causes water hammer, wet steam, and rapid cycling. D's Air measures EDR on every steam boiler installation.

Water Quality and Treatment

Steam boiler water quality directly affects system performance and longevity. Impurities cause foaming, which produces wet steam and water hammer. Proper pH balance prevents corrosion of the boiler sections and pipes. D's Air tests water quality and recommends treatment on every steam boiler installation and service call.

Common Steam System Problems

The most frequent steam system issues in Chicago buildings: water hammer (banging pipes — usually caused by wet steam, improper pitch, or failed steam traps), uneven heat between floors (failed vents or traps), boiler cycling on low water (LWCO trips — check water level and return lines), and radiators that won't heat (air-bound — replace the air vent).

What to Expect From Your D's Air Steam Boiler Service

1

System Assessment

We inspect the boiler, near-boiler piping, Hartford Loop, vents, traps, and radiators before recommending any work.

2

EDR Measurement

For new installations, we measure every radiator in the building to size the replacement boiler correctly.

3

Written Estimate

You receive a complete written estimate covering equipment, labor, piping, and permits before any work begins.

4

Installation

Our crew installs the new boiler with proper near-boiler piping, Hartford Loop, and all safety controls.

5

Startup & Testing

We fill the system, fire the boiler, verify steam pressure, check all vents and traps, and confirm heat to every radiator.

6

Customer Training

We explain how to check the water level, what the pressuretrol does, and what maintenance is needed annually.

D's Air Steam Boiler Standards — Every Installation

  • EDR calculation — boiler sized to match connected radiation
  • Hartford Loop installed per industry standard
  • Near-boiler piping per manufacturer specifications
  • Equalizer pipe properly sized and connected
  • Low-water cutoff tested and verified
  • Pressuretrol set to correct operating pressure (typically 0.5–2 PSI)
  • All steam vents and traps inspected and replaced as needed
  • Water quality tested — treatment recommended if needed
  • Gas pressure test and combustion analysis at startup
  • City of Chicago permit pulled on every installation

What Our Customers Say

4.6 / 5.0

Based on Google Reviews — D's Air & Heating, Inc.

M

Marcus T.

Furnace Replacement

"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."

Verified Google Review
L

Latoya W.

Boiler Repair

"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."

Verified Google Review
J

James R.

AC Installation

"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."

Verified Google Review

Ready to Work With Chicago's Trusted HVAC Company?

D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.

📅 Book Online📞 Don't Freeze — Call D's!🚨 Need Help ASAP?Same-Day HVAC Service Available