Weil-McLain CGi® Series 5 Cast-Iron Boiler Installation Chicago
Authorized Weil-McLain Dealer Serving Chicago Since 2009
Weil-McLain · Chicago Installation
CGi® Series 5
Cast-iron gas hot-water boiler — 84% AFUE, B-Vent compatible, built for Chicago homes.
Why D's Air & Heating, Inc. Recommends CGi® Series 5
Cast-Iron Durability
CGi Series 5 cast-iron sections are built to last 30–50 years — the proven standard for Chicago hydronic heating.
84% AFUE
Reliable 84% AFUE efficiency — a solid upgrade over older atmospheric boilers in Chicago homes.
Category I / B-Vent
Compatible with standard B-Vent and most existing chimney configurations in Chicago homes.
Hot-Water Hydronic
Designed for baseboard, radiant floor, and cast-iron radiator systems common in Chicago bungalows and two-flats.
Wide BTU Range
Available from 75,000 to 300,000 BTU/hr — covers single-family homes and larger multi-unit buildings.
Weil-McLain Warranty
Backed by Weil-McLain's limited warranty. D's Air & Heating, Inc. registers at startup.
The Weil-McLain CGi® Series 5 is a cast-iron gas hot-water boiler built for long-term reliability in Chicago's demanding climate. Its cast-iron heat exchanger sections are the traditional choice for Chicago homes — proven to last 30–50 years with proper maintenance and annual tune-ups.
The CGi Series 5 uses standard Category I / B-Vent venting, making it compatible with most existing chimney configurations in Chicago bungalows, two-flats, and greystones. This is a key advantage for replacement installations where upgrading to PVC condensing venting would require significant additional work.
D's Air & Heating, Inc. installs the CGi Series 5 throughout Chicago and the southwest suburbs. We handle all City of Chicago mechanical permits, piping, controls, and startup — and register your Weil-McLain warranty before we leave.
CGi® Series 5 — Installed Pricing
*Local taxes may apply. Financing available. Prices shown are D's Air & Heating, Inc. approved pricing.
Pricing Coming Soon
We're finalizing our approved installed pricing for this series. Call (773) 940-0965 or book online for a same-day quote.
CGi® Series 5
gas hot water
*Local taxes may apply. Financing available on approved credit.
Our Installation Process
- 1
Free On-Site Estimate
We assess your existing system, measure your space, and recommend the right Weil-McLain model for your home.
- 2
Permit & Scheduling
D's Air & Heating, Inc. pulls all required City of Chicago mechanical permits before work begins.
- 3
Professional Installation
Our licensed technicians install your new boiler to manufacturer specs, including all piping, controls, and venting.
- 4
Startup & Testing
We fire up the system, verify all zones, check for leaks, and confirm proper operation before we leave.
- 5
Warranty Registration
We register your Weil-McLain warranty and leave you with all documentation.
Weil-McLain Warranty Coverage
- Up to 10-year limited heat exchanger warranty on select condensing models
- 3-year limited parts warranty on most residential models
- 1-year labor warranty from D's Air & Heating, Inc.
- Warranty valid only with professional installation by a licensed contractor
Financing Available
Don't let upfront cost stop you from getting the right boiler. Ask about our flexible financing options on approved credit.
Book a Free EstimateWeil-McLain Boiler Installation & Service Experts
D's Air & Heating proudly provides professional Weil-McLain boiler installation, replacement, repair, maintenance, and emergency service throughout Chicago and surrounding communities. Weil-McLain is recognized as one of the most trusted names in the boiler industry, delivering reliable heating solutions for residential, commercial, steam, and hot water applications.
Our experienced boiler technicians install and service a wide range of Weil-McLain equipment, including high-efficiency condensing boilers, cast iron hot water boilers, commercial heating systems, and steam boiler applications. Whether you need a new Weil-McLain boiler installation Chicago homeowners and businesses rely on, complete boiler replacement, annual maintenance, or emergency repair service, D's Air & Heating has the expertise to keep your heating system operating safely and efficiently.
We help customers select the right Weil-McLain boiler based on building requirements, heating loads, efficiency goals, and budget considerations while ensuring every installation meets manufacturer specifications and local code requirements.
From residential heating systems to large commercial boiler projects, D's Air & Heating delivers quality workmanship, expert system design, and dependable customer support backed by industry-leading Weil-McLain technology and warranty protection. Our Weil-McLain boiler repair Chicago customers trust us for fast diagnostics, genuine parts, and lasting fixes.
Contact D's Air & Heating today at (773) 940-0965 to schedule your free estimate for Weil-McLain boiler installation, replacement, maintenance, or repair services.
Ready to Replace Your Boiler?
D's Air & Heating, Inc. installs Weil-McLain boilers throughout Chicago and the southwest suburbs. Call now or book online.
Why Chicago Homeowners Trust D's Air & Heating
Licensed & Insured
IL License #2183457
Serving Chicago
Since 2009
Authorized Dealer
Multiple Brands
No Contracts
Ever — Guaranteed
Permit Pulled
Every Installation
Professional Standards
Code-Compliant Work
EPA Certified
Mainstream Engineering
R-410A Certified
Mainstream Engineering
Why Choose D's Air & Heating, Inc.?
Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.
Experience Since 2009
D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.
Manufacturer-Trained Technicians
Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.
Licensed, Insured & Permitted
D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.
Honest Recommendations
We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.
Local Chicago Expertise
We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.
Long-Term Customer Support
Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.
Steam Boiler Expertise — What Chicago Building Owners Should Know
How a Steam Heating System Works
A steam boiler heats water to 212°F, producing steam that rises naturally through supply pipes to cast-iron radiators throughout the building. As the steam gives up its heat, it condenses back to water and returns to the boiler by gravity. One-pipe systems use the same pipe for both steam supply and condensate return. Two-pipe systems use separate supply and return lines, allowing better control and zoning.
The Hartford Loop — Why It Matters
The Hartford Loop is a critical safety piping arrangement on steam boilers. It prevents the boiler from losing its water level if a return pipe develops a leak. Without a properly installed Hartford Loop, a pipe failure can drain the boiler dry, causing catastrophic damage. D's Air installs the Hartford Loop correctly on every steam boiler installation.
Steam Boiler Sizing — EDR Calculations
Steam boilers are sized by Equivalent Direct Radiation (EDR) — the total radiation capacity of all the radiators in the building. The boiler must be sized to match the connected radiation, not the building's heat loss. An oversized steam boiler causes water hammer, wet steam, and rapid cycling. D's Air measures EDR on every steam boiler installation.
Water Quality and Treatment
Steam boiler water quality directly affects system performance and longevity. Impurities cause foaming, which produces wet steam and water hammer. Proper pH balance prevents corrosion of the boiler sections and pipes. D's Air tests water quality and recommends treatment on every steam boiler installation and service call.
Common Steam System Problems
The most frequent steam system issues in Chicago buildings: water hammer (banging pipes — usually caused by wet steam, improper pitch, or failed steam traps), uneven heat between floors (failed vents or traps), boiler cycling on low water (LWCO trips — check water level and return lines), and radiators that won't heat (air-bound — replace the air vent).
What to Expect From Your D's Air Steam Boiler Service
System Assessment
We inspect the boiler, near-boiler piping, Hartford Loop, vents, traps, and radiators before recommending any work.
EDR Measurement
For new installations, we measure every radiator in the building to size the replacement boiler correctly.
Written Estimate
You receive a complete written estimate covering equipment, labor, piping, and permits before any work begins.
Installation
Our crew installs the new boiler with proper near-boiler piping, Hartford Loop, and all safety controls.
Startup & Testing
We fill the system, fire the boiler, verify steam pressure, check all vents and traps, and confirm heat to every radiator.
Customer Training
We explain how to check the water level, what the pressuretrol does, and what maintenance is needed annually.
D's Air Steam Boiler Standards — Every Installation
- EDR calculation — boiler sized to match connected radiation
- Hartford Loop installed per industry standard
- Near-boiler piping per manufacturer specifications
- Equalizer pipe properly sized and connected
- Low-water cutoff tested and verified
- Pressuretrol set to correct operating pressure (typically 0.5–2 PSI)
- All steam vents and traps inspected and replaced as needed
- Water quality tested — treatment recommended if needed
- Gas pressure test and combustion analysis at startup
- City of Chicago permit pulled on every installation
What Our Customers Say
Based on Google Reviews — D's Air & Heating, Inc.
Marcus T.
Furnace Replacement
"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."
Latoya W.
Boiler Repair
"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."
James R.
AC Installation
"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."
Ready to Work With Chicago's Trusted HVAC Company?
D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.