D's Air & Heating, Inc.

Weil-McLain Evergreen® Pro Series 1 Boiler Installation Chicago

Don't 'FREEZE' — Call D's!

Authorized Weil-McLain Dealer Serving Chicago Since 2009

Weil-McLain · Chicago Installation

Evergreen® Pro Series 1

95% AFUE condensing gas hot-water boiler — proven high-efficiency heating for Chicago homes.

Weil-McLain Evergreen Pro Series 1 gas boiler
A $95.35 Service Call Fee is Required for All Service Appointments, Including Warranty Claims.

Why D's Air & Heating, Inc. Recommends Evergreen® Pro Series 1

95% AFUE Condensing

The Evergreen Pro Series 1 delivers 95% AFUE condensing efficiency — significantly lower fuel bills compared to standard atmospheric boilers.

Wide Capacity Range

Available from 80,000 to 200,000 BTU/hr to match Chicago homes from small bungalows to large two-flats.

Direct Vent / PVC

Sealed combustion with PVC venting for safe, flexible installation without a chimney.

Stainless Heat Exchanger

Built for condensing operation with a stainless steel heat exchanger for long-term durability.

Hydronic Compatible

Works with baseboard, cast-iron radiators, and radiant floor systems throughout Chicago.

Weil-McLain Warranty

Backed by Weil-McLain's limited warranty. D's Air & Heating, Inc. registers at startup.

The Weil-McLain Evergreen® Pro Series 1 is a condensing gas hot-water boiler delivering 95% AFUE. It's a proven high-efficiency option for Chicago homeowners upgrading from older atmospheric systems, offering significant fuel savings with direct vent / PVC installation that doesn't require an existing chimney.

The Evergreen Pro Series 1 is available in sizes from 80,000 to 200,000 BTU/hr, covering the full range of Chicago residential heating loads from small bungalows to large two-flats and greystones.

D's Air & Heating, Inc. installs the Evergreen Pro Series 1 throughout Chicago and the southwest suburbs. We handle all City of Chicago mechanical permits, piping, controls, and startup — and register your Weil-McLain warranty before we leave.

Evergreen® Pro Series 1 — Installed Pricing

*Local taxes may apply. Financing available. Prices shown are D's Air & Heating, Inc. approved pricing.

Pricing Coming Soon

We're finalizing our approved installed pricing for this series. Call (773) 940-0965 or book online for a same-day quote.

Evergreen® Pro Series 1

gas hot water

Efficiency95% AFUE
Input BTU/hr80,000–200,000
Fuelnatural gas propane
VentingDirect Vent / PVC
Sale PriceGet a Free Estimate
Installed PriceGet a Free Estimate
Get a Free Estimate

*Local taxes may apply. Financing available on approved credit.

Our Installation Process

  1. 1

    Free On-Site Estimate

    We assess your existing system, measure your space, and recommend the right Weil-McLain model for your home.

  2. 2

    Permit & Scheduling

    D's Air & Heating, Inc. pulls all required City of Chicago mechanical permits before work begins.

  3. 3

    Professional Installation

    Our licensed technicians install your new boiler to manufacturer specs, including all piping, controls, and venting.

  4. 4

    Startup & Testing

    We fire up the system, verify all zones, check for leaks, and confirm proper operation before we leave.

  5. 5

    Warranty Registration

    We register your Weil-McLain warranty and leave you with all documentation.

Weil-McLain Warranty Coverage

  • Up to 10-year limited heat exchanger warranty on select condensing models
  • 3-year limited parts warranty on most residential models
  • 1-year labor warranty from D's Air & Heating, Inc.
  • Warranty valid only with professional installation by a licensed contractor

Financing Available

Don't let upfront cost stop you from getting the right boiler. Ask about our flexible financing options on approved credit.

Book a Free Estimate

Weil-McLain Boiler Installation & Service Experts

D's Air & Heating proudly provides professional Weil-McLain boiler installation, replacement, repair, maintenance, and emergency service throughout Chicago and surrounding communities. Weil-McLain is recognized as one of the most trusted names in the boiler industry, delivering reliable heating solutions for residential, commercial, steam, and hot water applications.

Our experienced boiler technicians install and service a wide range of Weil-McLain equipment, including high-efficiency condensing boilers, cast iron hot water boilers, commercial heating systems, and steam boiler applications. Whether you need a new Weil-McLain boiler installation Chicago homeowners and businesses rely on, complete boiler replacement, annual maintenance, or emergency repair service, D's Air & Heating has the expertise to keep your heating system operating safely and efficiently.

We help customers select the right Weil-McLain boiler based on building requirements, heating loads, efficiency goals, and budget considerations while ensuring every installation meets manufacturer specifications and local code requirements.

From residential heating systems to large commercial boiler projects, D's Air & Heating delivers quality workmanship, expert system design, and dependable customer support backed by industry-leading Weil-McLain technology and warranty protection. Our Weil-McLain boiler repair Chicago customers trust us for fast diagnostics, genuine parts, and lasting fixes.

Contact D's Air & Heating today at (773) 940-0965 to schedule your free estimate for Weil-McLain boiler installation, replacement, maintenance, or repair services.

No Contracts · No Gimmicks

Ready to Replace Your Boiler?

D's Air & Heating, Inc. installs Weil-McLain boilers throughout Chicago and the southwest suburbs. Call now or book online.

Chicago Heating & Cooling Done Right.  ·  Don't ‘FREEZE’ Call D's...

Why Chicago Homeowners Trust D's Air & Heating

Licensed & Insured

IL License #2183457

Serving Chicago

Since 2009

Authorized Dealer

Multiple Brands

No Contracts

Ever — Guaranteed

Permit Pulled

Every Installation

Professional Standards

Code-Compliant Work

EPA Certified

Mainstream Engineering

R-410A Certified

Mainstream Engineering

Why Choose D's Air & Heating, Inc.?

Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.

Experience Since 2009

D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.

Manufacturer-Trained Technicians

Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.

Licensed, Insured & Permitted

D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.

Honest Recommendations

We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.

Local Chicago Expertise

We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.

Long-Term Customer Support

Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.

Commercial HVAC in Chicago — What Building Owners Should Know

Commercial vs. Residential HVAC

Commercial HVAC systems are designed for larger spaces, higher occupancy loads, and continuous operation. Rooftop packaged units (RTUs) are the most common commercial heating and cooling solution in Chicago — they combine heating, cooling, and ventilation in a single cabinet mounted on the roof. Commercial systems require more complex controls, larger electrical service, and more rigorous maintenance than residential equipment.

Rooftop Unit Selection and Sizing

Commercial RTUs are sized in tons of cooling capacity, from 3 tons for small retail spaces to 50+ tons for large commercial buildings. Proper sizing requires calculating cooling load (heat gain through walls, roof, windows, occupancy, and equipment) and heating load. Oversized RTUs short-cycle, causing temperature swings and premature compressor wear. D's Air performs commercial load calculations on every project.

Permits and Code Compliance

Commercial HVAC work in Chicago requires mechanical permits from the City of Chicago Department of Buildings. Work must comply with the Chicago Building Code, ASHRAE 90.1 energy standards, and ASHRAE 62.1 ventilation requirements. D's Air handles all permit applications and inspections for commercial projects.

Preventive Maintenance Contracts

Commercial HVAC equipment operates year-round under heavy loads. Preventive maintenance — quarterly or semi-annual inspections, filter changes, coil cleaning, belt and bearing checks, refrigerant verification — extends equipment life and prevents costly emergency failures. D's Air offers commercial maintenance contracts tailored to your building's equipment and schedule.

What to Expect From D's Air Commercial HVAC Services

1

Site Assessment

We visit your building, assess existing equipment and infrastructure, and identify project requirements.

2

Engineering

We perform load calculations, equipment selection, and permit drawings for your project.

3

Permitting

We handle all City of Chicago permit applications and coordinate inspections.

4

Installation

Our commercial crew installs equipment to code, including crane lifts for rooftop units.

5

Commissioning

We test all equipment, verify airflow and refrigerant charge, and document system performance.

6

Ongoing Support

We offer preventive maintenance contracts and priority emergency service for commercial clients.

D's Air Commercial HVAC Standards

  • Commercial load calculation — cooling and heating
  • Equipment selection per ASHRAE 90.1 energy standards
  • Ventilation design per ASHRAE 62.1
  • City of Chicago mechanical permit on every project
  • Crane lift coordination for rooftop equipment
  • Curb adapter fabrication for non-standard roof openings
  • BAS/BMS integration where required
  • Commissioning documentation provided
  • Preventive maintenance contracts available

What Our Customers Say

4.6 / 5.0

Based on Google Reviews — D's Air & Heating, Inc.

M

Marcus T.

Furnace Replacement

"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."

Verified Google Review
L

Latoya W.

Boiler Repair

"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."

Verified Google Review
J

James R.

AC Installation

"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."

Verified Google Review

Ready to Work With Chicago's Trusted HVAC Company?

D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.

📅 Book Online📞 Don't Freeze — Call D's!🚨 Need Help ASAP?Same-Day HVAC Service Available