Authorized Peerless Boiler Dealer Serving Chicago Since 2009
Peerless Series 64 Commercial Steam Boiler — Chicago
Cast-iron atmospheric steam and hot water boilers for 6–30 unit apartment buildings, churches, small commercial buildings, and mixed-use properties. Five models from 64-07 through 64-11, steam installed from $15,141, hot water installed from $14,894. D's Air & Heating, Inc. — IL License #2183457.
Peerless Series 64 — Chicago's Mid-Size Commercial Steam Boiler
The Peerless Series 64 is the most popular commercial steam boiler for Chicago's mid-size apartment buildings. With input capacities from 345,000 to 575,000 BTU/hr and steam installed prices from $15,141 to $17,986, the Series 64 delivers proven cast-iron reliability at a lower cost than the larger 211A Series. D's Air & Heating, Inc. has installed Series 64 boilers in apartment buildings, churches, and commercial properties throughout Chicago.
D's Air Ratings
Series 64 Pricing — 2026 D's Air & Heating
Larger boilers = lower cost per BTU. Although larger boilers have higher total project costs, the installed cost per BTU decreases as size increases because labor, controls, permitting, startup, engineering, commissioning, and project management costs are spread across more heating capacity.
| Model | Input BTU | Equipment | Installed |
|---|---|---|---|
| 64-07 Steam | 345,000 BTU | $8,141 | $15,141 |
| 64-08 Steam | 399,000 BTU | $8,628 | $15,628 |
| 64-09 Steam | 460,000 BTU | $9,293 | $16,293 |
| 64-10 Steam | 517,000 BTU | $9,996 | $16,996 |
| 64-11 Steam | 575,000 BTU | $10,986 | $17,986 |
| 64-07 Water | 345,000 BTU | $7,894 | $14,894 |
| 64-08 Water | 399,000 BTU | $8,330 | $15,330 |
| 64-09 Water | 460,000 BTU | $9,044 | $16,044 |
| 64-10 Water | 517,000 BTU | $9,737 | $16,737 |
| 64-11 Water | 575,000 BTU | $9,786 | $16,786 |
Pricing shown is budgetary planning pricing for standard replacement applications. Final project pricing may vary based on venting requirements, controls, gas service modifications, rigging, accessibility, mechanical room conditions, code compliance upgrades, asbestos abatement, and overall project scope. A site inspection may be required before final pricing is provided.
Standard Installation Includes
- Peerless Series 64 boiler
- Automatic water feeder
- Low water cutoff
- Pressure control
- Pressure gauge
- Safety relief valve
- Gas piping connections
- Near-boiler steam piping
- Flue pipe modifications
- Electrical connections
- Start-up and combustion testing
- System commissioning
Best Applications
- 6–30 unit apartment buildings
- Churches and houses of worship
- Small commercial buildings
- Mixed-use properties
- Residential complexes
- Steam heating retrofits
Why Choose Series 64?
- Proven atmospheric steam boiler
- Cast iron sectional construction
- Simple serviceability
- Long equipment life
- Excellent apartment building boiler
- Ideal for mid-size steam systems
- Lower initial cost than 211A Series
Series 64 vs. Series 211A
Series 64
Capacity: Up to 575,000 BTU
Overall: ★★★★★
Best For: Mid-size buildings
Installed: $15,141 Installed (Steam)
Series 211A
Capacity: 840,000 BTU+
Overall: ★★★★☆
Best For: Large buildings
Installed: $36,332 Installed
Chicago's 6-flat and 12-flat apartment buildings built between 1900 and 1960 were almost universally heated with steam. When the original boiler fails, the Series 64 is the most common replacement choice — it's sized correctly for these buildings, it's compatible with existing steam piping and radiators, and it's built to last 40+ years with proper maintenance.
D's Air & Heating, Inc. handles every aspect of Series 64 commercial boiler replacement in Chicago. We pull all required permits, handle the gas piping and electrical connections, modify the flue piping, and commission the system before we leave. Our complete installed packages mean no surprises — the price you see is the price you pay.
The Series 64 64-11 is the largest model in the lineup at 575,000 BTU/hr input and $17,986 installed (steam). For buildings that need more than 575,000 BTU/hr, the Peerless 211A Series starts at 840,000 BTU/hr and is available from D's Air & Heating starting at $36,332 installed.
Peerless Boiler Installation & Service Experts
D's Air & Heating proudly provides professional Peerless boiler installation, replacement, repair, maintenance, and emergency service throughout Chicago and surrounding communities. Peerless Boilers has earned a reputation for manufacturing dependable, energy-efficient residential and commercial heating systems designed to deliver long-lasting performance and reliable comfort.
Our experienced boiler technicians install and service a wide range of Peerless heating equipment, including cast iron boilers, high-efficiency condensing boilers, steam boilers, and hot water boiler systems. Whether you need a new Peerless boiler installation Chicago homeowners and businesses rely on, complete boiler replacement, annual maintenance, or emergency repair service, D's Air & Heating has the expertise to keep your heating system operating safely, efficiently, and reliably throughout the year.
We help homeowners, property managers, and commercial building owners select the right Peerless boiler for their specific heating requirements, efficiency goals, and budget. Every installation is completed according to manufacturer specifications and local code requirements, ensuring safe, reliable operation and full warranty coverage.
From residential steam and hot water boilers to large commercial boiler systems, D's Air & Heating delivers quality workmanship, expert system design, and dependable customer support backed by Peerless technology and warranty protection. Our Peerless boiler repair Chicago customers trust us for fast diagnostics, genuine parts, and lasting fixes.
Contact D's Air & Heating today at (773) 940-0965 to schedule your free estimate for Peerless boiler installation, replacement, maintenance, or repair services.
Request a Series 64 Commercial Boiler Estimate
D's Air & Heating, Inc. installs and replaces Peerless Series 64 commercial steam boilers throughout Chicago. Contact us for a free estimate.
IL License #2183457 · Serving Chicago Since 2009
Why Chicago Homeowners Trust D's Air & Heating
Licensed & Insured
IL License #2183457
Serving Chicago
Since 2009
Authorized Dealer
Multiple Brands
No Contracts
Ever — Guaranteed
Permit Pulled
Every Installation
Professional Standards
Code-Compliant Work
EPA Certified
Mainstream Engineering
R-410A Certified
Mainstream Engineering
Why Choose D's Air & Heating, Inc.?
Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.
Experience Since 2009
D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.
Manufacturer-Trained Technicians
Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.
Licensed, Insured & Permitted
D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.
Honest Recommendations
We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.
Local Chicago Expertise
We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.
Long-Term Customer Support
Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.
Steam Boiler Expertise — What Chicago Building Owners Should Know
How a Steam Heating System Works
A steam boiler heats water to 212°F, producing steam that rises naturally through supply pipes to cast-iron radiators throughout the building. As the steam gives up its heat, it condenses back to water and returns to the boiler by gravity. One-pipe systems use the same pipe for both steam supply and condensate return. Two-pipe systems use separate supply and return lines, allowing better control and zoning.
The Hartford Loop — Why It Matters
The Hartford Loop is a critical safety piping arrangement on steam boilers. It prevents the boiler from losing its water level if a return pipe develops a leak. Without a properly installed Hartford Loop, a pipe failure can drain the boiler dry, causing catastrophic damage. D's Air installs the Hartford Loop correctly on every steam boiler installation.
Steam Boiler Sizing — EDR Calculations
Steam boilers are sized by Equivalent Direct Radiation (EDR) — the total radiation capacity of all the radiators in the building. The boiler must be sized to match the connected radiation, not the building's heat loss. An oversized steam boiler causes water hammer, wet steam, and rapid cycling. D's Air measures EDR on every steam boiler installation.
Water Quality and Treatment
Steam boiler water quality directly affects system performance and longevity. Impurities cause foaming, which produces wet steam and water hammer. Proper pH balance prevents corrosion of the boiler sections and pipes. D's Air tests water quality and recommends treatment on every steam boiler installation and service call.
Common Steam System Problems
The most frequent steam system issues in Chicago buildings: water hammer (banging pipes — usually caused by wet steam, improper pitch, or failed steam traps), uneven heat between floors (failed vents or traps), boiler cycling on low water (LWCO trips — check water level and return lines), and radiators that won't heat (air-bound — replace the air vent).
What to Expect From Your D's Air Steam Boiler Service
System Assessment
We inspect the boiler, near-boiler piping, Hartford Loop, vents, traps, and radiators before recommending any work.
EDR Measurement
For new installations, we measure every radiator in the building to size the replacement boiler correctly.
Written Estimate
You receive a complete written estimate covering equipment, labor, piping, and permits before any work begins.
Installation
Our crew installs the new boiler with proper near-boiler piping, Hartford Loop, and all safety controls.
Startup & Testing
We fill the system, fire the boiler, verify steam pressure, check all vents and traps, and confirm heat to every radiator.
Customer Training
We explain how to check the water level, what the pressuretrol does, and what maintenance is needed annually.
D's Air Steam Boiler Standards — Every Installation
- EDR calculation — boiler sized to match connected radiation
- Hartford Loop installed per industry standard
- Near-boiler piping per manufacturer specifications
- Equalizer pipe properly sized and connected
- Low-water cutoff tested and verified
- Pressuretrol set to correct operating pressure (typically 0.5–2 PSI)
- All steam vents and traps inspected and replaced as needed
- Water quality tested — treatment recommended if needed
- Gas pressure test and combustion analysis at startup
- City of Chicago permit pulled on every installation
What Our Customers Say
Based on Google Reviews — D's Air & Heating, Inc.
Marcus T.
Furnace Replacement
"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."
Latoya W.
Boiler Repair
"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."
James R.
AC Installation
"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."
Ready to Work With Chicago's Trusted HVAC Company?
D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.