Power Vent Upgrade Bundle
Power Vent Water Heater + PVC Venting System
What's Included
The Power Vent Upgrade Bundle solves venting challenges in Chicago homes where the existing metal flue is shared, deteriorated, or too long for a standard atmospheric unit. A power vent motor pushes exhaust through PVC pipe — giving you flexible routing and higher efficiency.
High-Efficiency Power Vent Water Heater
0.62+ EF, built-in blower motor for forced exhaust
PVC Venting System
Schedule 40 PVC exhaust pipe — flexible routing through walls or rim joist
Condensate Pump (if required)
Handles condensate drainage when gravity drain isn't available
Thermal Expansion Tank
Required by Chicago code on closed plumbing systems
Full Installation & Startup
Permitted, inspected, haul-away of old unit included
Bundle Specifications
| Efficiency Rating | 0.62+ EF — higher than atmospheric |
| Vent Type | Power Vent — PVC exhaust pipe |
| Fuel Type | Natural Gas |
| Venting Flexibility | Up to 100 ft equivalent vent run |
| Expansion Tank | Included — code required |
| Warranty | Manufacturer + D's Air labor warranty |
Why Power Vent?
Solves Venting Problems
Ideal when the existing metal flue is shared with a furnace, deteriorated, or the run is too long for atmospheric venting.
Flexible Routing
PVC pipe can be routed horizontally through walls or rim joists — no need to use the existing chimney flue.
Higher Efficiency
Power vent units extract more heat from combustion gases than standard atmospheric models, lowering your gas bill.
Chicago Code Compliant
All venting, expansion tank, and gas connections meet current Chicago mechanical and plumbing codes.
"Solved our venting issues and heats faster than the old unit. Darryl explained everything before starting — no surprises."
— Kevin M., Wicker Park, Chicago
15% Off With Our Maintenance Agreement
Sign up for a D's Air Maintenance Agreement and receive 15% off qualifying repairs and upgrades upon acceptance.
Service call charge is for travel and diagnostics only. It is not deducted from the job total.
Frequently Asked Questions
When do I need a power vent water heater?
When your existing metal flue is shared with a furnace, is deteriorated, or the vent run is too long for a standard atmospheric unit. Also required when the water heater is in a location without direct chimney access.
Does a power vent unit require electricity?
Yes — the blower motor requires a standard 120V outlet near the unit. Most utility rooms already have one.
Is a permit required?
Yes — all water heater replacements in Chicago require a permit. We pull and manage the permit for you.
How long does installation take?
Most power vent installs are completed in 3–5 hours including new PVC venting. We haul away the old unit at no extra charge.
Solve Your Venting Problem Today
D's Air & Heating, Inc. — Chicago's licensed HVAC contractor since 2009. No contracts. Upfront pricing. IL License #2183457.
Why Chicago Homeowners Trust D's Air & Heating
Licensed & Insured
IL License #2183457
Serving Chicago
Since 2009
Authorized Dealer
Multiple Brands
No Contracts
Ever — Guaranteed
Permit Pulled
Every Installation
Professional Standards
Code-Compliant Work
EPA Certified
Mainstream Engineering
R-410A Certified
Mainstream Engineering
Why Choose D's Air & Heating, Inc.?
Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.
Experience Since 2009
D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.
Manufacturer-Trained Technicians
Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.
Licensed, Insured & Permitted
D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.
Honest Recommendations
We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.
Local Chicago Expertise
We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.
Long-Term Customer Support
Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.
Water Heater Installation in Chicago — What Homeowners Should Know
Tank vs. Tankless Water Heaters
Traditional tank water heaters store 40–80 gallons of hot water, ready on demand. They are less expensive upfront but continuously heat water even when not in use (standby loss). Tankless (on-demand) water heaters heat water only when needed, eliminating standby loss and providing unlimited hot water. Tankless units cost more upfront but typically last 20+ years vs. 10–12 years for tank units.
Sizing Your Water Heater
Tank water heaters are sized by first-hour rating (FHR) — how many gallons they can deliver in the first hour of use. A family of four typically needs 60–80 gallons FHR. Tankless units are sized by flow rate (GPM) and temperature rise. Undersizing causes cold water complaints; oversizing wastes energy. D's Air sizes every water heater to your household's actual demand.
Venting and Gas Requirements
Gas water heaters require proper venting to exhaust combustion gases. Atmospheric units use a draft hood and natural draft flue. Power-vent units use a blower to exhaust horizontally through PVC pipe. Direct-vent units draw combustion air from outside. Each type has specific clearance and termination requirements. D's Air verifies venting compliance on every installation.
Water Quality and Anode Rods
Chicago's water supply is moderately hard. Mineral buildup (scale) reduces water heater efficiency and shortens tank life. The sacrificial anode rod protects the tank from corrosion — it should be inspected every 3–5 years and replaced when depleted. D's Air checks anode rod condition on every water heater service call.
What to Expect From Your D's Air Water Heater Installation
Free Estimate
We assess your current unit, household demand, and venting situation, then provide written options.
Equipment Selection
We recommend the right type, size, and efficiency level for your home and budget.
Installation Day
Our crew removes the old unit, installs the new one with proper connections and venting, and cleans up completely.
Startup & Testing
We verify gas pressure, test the T&P valve, check for leaks, and confirm proper hot water delivery.
Customer Training
We walk you through temperature settings, the T&P valve location, and annual maintenance.
Warranty Support
We register your equipment and remain available for follow-up service.
D's Air Water Heater Installation Standards
- Proper sizing — first-hour rating or GPM matched to household demand
- Venting verified — type, clearances, and termination per code
- Gas line pressure test and leak check
- Temperature and pressure relief valve tested and properly piped
- Expansion tank installed on closed systems
- Seismic strapping where required by code
- Condensate drain for high-efficiency and tankless units
- City of Chicago permit pulled on every installation
- Equipment registered for full manufacturer warranty
What Our Customers Say
Based on Google Reviews — D's Air & Heating, Inc.
Marcus T.
Furnace Replacement
"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."
Latoya W.
Boiler Repair
"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."
James R.
AC Installation
"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."
Ready to Work With Chicago's Trusted HVAC Company?
D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.