Authorized Ruud Dealer — Serving Chicago Since 2009
Ruud Cooling Coil Installation & Replacement Chicago
RCFY Endeavor™ Line Evaporator Coils — R-454B Compatible, AHRI Certified, Matched Ruud Systems
Contact D's Air & Heating For Pricing
Coil pricing depends on size, configuration, and system match. Call or request a free estimate.
Ruud Endeavor™ Line
RCFY Evaporator Coil — Built for Matched Ruud Systems
The Ruud RCFY Endeavor™ Line cooling coil is engineered to work as a matched system with Ruud outdoor condensing units. Designed for R-454B refrigerant, AHRI certified, and factory leak tested — the RCFY delivers reliable, efficient cooling performance across a wide range of residential applications.
With support for upflow, downflow, horizontal, and vertical installations, the RCFY adapts to virtually any equipment configuration. Its bi-directional airflow design and N-coil performance geometry maximize heat transfer efficiency while minimizing pressure drop across the coil.
RCFY Features & Product Benefits
System Features
- Airflow Capacity 600–1,900 CFM
- R-454B Refrigerant Compatible
- Matched With Ruud Outdoor Units
- Capacity 18,000 BTU
- Vertical Applications
- Horizontal Applications
- Upflow Applications
- Downflow Applications
Product Benefits
- Aluminum Fin Construction
- Internally Grooved Aluminum Tubing
- Factory Leak Tested
- Copper Sweat Connections
- Dual Condensate Drain Connections
- TXV / EEV Compatibility
- UV Light Compatible
- Bi-Directional Airflow Design
- Flexible Installation Applications
- N-Coil Performance Design
- AHRI Certified Performance
Ruud RCFY Endeavor™ Line — Product Photo
Installed With These Ruud Outdoor Units
The RCFY coil is matched and AHRI certified with all 16 Ruud Endeavor™ Line condensing units we install in Chicago.
What's Included in Your Coil Installation
Equipment & Materials
We supply and install the Ruud RCFY evaporator coil, refrigerant line connections, condensate drain piping, and all required fittings. Every component is matched to your existing Ruud outdoor unit for AHRI-certified system performance.
Labor Breakdown
Our certified technicians handle full coil removal, new coil installation, refrigerant evacuation and recharge, leak testing, and system startup verification. All labor is performed by IL-licensed HVAC professionals.
Scope of Work
Scope includes: existing coil removal and disposal, new RCFY coil installation, TXV or EEV installation if required, condensate drain connection, refrigerant charge verification, and full system performance test.
Warranty
Ruud RCFY coils carry a manufacturer parts warranty when registered. D's Air & Heating provides a workmanship warranty on all installation labor. Contact us for current warranty terms.
Financing
Financing options are available for qualified customers. Ask about 0% interest financing on approved credit. Contact D's Air & Heating for current financing offers.
Add to Your Estimate
Ruud RCFY Endeavor™ Line Cooling Coil
R-454B Compatible · AHRI Certified · 18,000 BTU
Pricing provided after free estimate — coil size and configuration vary.
Why D's Air & Heating, Inc.
IL Licensed & Insured
IL License #2183457. Every installation is performed by certified, insured HVAC professionals.
No Contracts Required
D's Air & Heating never requires service contracts. You pay for what you need, when you need it.
Ruud Authorized Installer
We install and service the full Ruud Endeavor™ Line — matched systems, AHRI certified performance.
4.8 Stars — 300+ Reviews
Hundreds of Chicago homeowners trust D's Air & Heating for honest, reliable HVAC service.
Same-Day Estimates
Call (773) 940-0965 or request online. We respond fast and get your estimate scheduled quickly.
Founded 2009
Over 15 years serving Chicago's North and West Side neighborhoods with quality HVAC installations.
Frequently Asked Questions — Ruud Cooling Coils
What is a Ruud RCFY cooling coil?
The Ruud RCFY is an Endeavor™ Line evaporator coil designed to work with Ruud outdoor condensing units. It sits inside your air handler or furnace and absorbs heat from indoor air, transferring it to the refrigerant circuit.
Is the RCFY coil compatible with R-454B refrigerant?
Yes. The Ruud RCFY Endeavor™ Line cooling coil is designed for R-454B refrigerant, which is the next-generation low-GWP refrigerant replacing R-410A in new equipment.
What BTU sizes are available for the RCFY coil?
The RCFY coil is available in capacities ranging from 18,000 BTU (1.5 ton) to 60,000 BTU (5 ton), covering most residential and light commercial applications.
Can the RCFY coil be installed in upflow and downflow configurations?
Yes. The RCFY features a bi-directional airflow design that supports upflow, downflow, horizontal, and vertical installation configurations, providing flexibility for different equipment setups.
Does the RCFY coil work with my existing Ruud outdoor unit?
The RCFY is engineered to match all current Ruud Endeavor™ Line outdoor condensing units including the UA, RA, and WA series. Proper matching ensures AHRI-certified system efficiency.
How long does a Ruud cooling coil installation take?
A standard RCFY coil replacement typically takes 3–5 hours depending on accessibility, refrigerant type, and whether the existing coil requires special handling. Our technicians will provide a time estimate before starting.
How much does a Ruud RCFY coil installation cost in Chicago?
Pricing depends on coil size, installation configuration, and labor requirements. Contact D's Air & Heating at (773) 940-0965 or request a free estimate for accurate pricing.
Do I need to replace my coil and outdoor unit at the same time?
For maximum efficiency and AHRI certification, we recommend replacing the coil and outdoor unit together as a matched system. However, coil-only replacement is possible in some situations — contact us to evaluate your system.
What is the warranty on a Ruud RCFY coil?
Ruud provides a manufacturer parts warranty on registered RCFY coils. D's Air & Heating also provides a workmanship warranty on all installation labor. Contact us for current warranty details.
Does D's Air & Heating service all Chicago neighborhoods?
Yes. D's Air & Heating serves Chicago and surrounding Chicagoland communities including Niles, Skokie, Morton Grove, Park Ridge, Rosemont, Harwood Heights, Norridge, Des Plaines, Lincolnwood, Elmwood Park, Evanston, and Oak Park.
Is a permit required for a cooling coil replacement in Chicago?
Permit requirements vary by municipality. D's Air & Heating handles all required permits for cooling coil installations in Chicago and surrounding communities. We ensure all work is code-compliant.
What is the airflow capacity range of the RCFY coil?
The Ruud RCFY coil supports airflow from 600 to 1,900 CFM, making it compatible with a wide range of air handler and furnace blower configurations.
Service Areas
Related Ruud Equipment
Why Chicago Homeowners Trust D's Air & Heating
Licensed & Insured
IL License #2183457
Serving Chicago
Since 2009
Authorized Dealer
Multiple Brands
No Contracts
Ever — Guaranteed
Permit Pulled
Every Installation
Professional Standards
Code-Compliant Work
EPA Certified
Mainstream Engineering
R-410A Certified
Mainstream Engineering
Why Choose D's Air & Heating, Inc.?
Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.
Experience Since 2009
D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.
Manufacturer-Trained Technicians
Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.
Licensed, Insured & Permitted
D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.
Honest Recommendations
We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.
Local Chicago Expertise
We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.
Long-Term Customer Support
Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.
What Chicago Homeowners Should Know About AC Installation
How a Central Air Conditioner Works
A central AC system uses refrigerant to absorb heat from indoor air at the evaporator coil (inside your air handler or furnace), then releases that heat outside at the condenser coil. The refrigerant cycle repeats continuously, cooling and dehumidifying your home. Modern systems use R-454B or R-410A refrigerant and achieve 16–26 SEER2 efficiency ratings.
Understanding SEER2 Ratings
SEER2 (Seasonal Energy Efficiency Ratio 2) measures cooling output per unit of energy consumed. The federal minimum for Illinois is 14.3 SEER2. A 16 SEER2 unit uses roughly 10% less energy than a 14.3 SEER2 unit. High-efficiency variable-speed systems at 20+ SEER2 can cut cooling costs by 30–40% compared to older 10 SEER equipment.
Matched System Importance
An air conditioner condenser must be matched to the correct indoor coil (evaporator) and air handler or furnace. Mismatched components reduce efficiency, void manufacturer warranties, and can cause premature compressor failure. D's Air always installs matched, certified system combinations.
Cooling Design for Chicago Homes
Chicago's humid summers demand proper equipment sizing and refrigerant charge. An oversized AC cools quickly but short-cycles, leaving humidity high and comfort low. An undersized unit runs constantly and can't maintain setpoint on the hottest days. D's Air performs Manual J load calculations on every installation.
What to Expect From Your D's Air AC Installation
Free Estimate
We assess your home, review your existing ductwork and electrical, and provide a written quote with equipment options.
Equipment Selection
We recommend the right SEER2 level, brand, and matched system for your home, budget, and comfort goals.
Installation Day
Our crew arrives on time, installs the condenser, indoor coil, and all connections cleanly and to code.
Startup & Testing
We verify refrigerant charge, measure airflow, test the thermostat, and confirm proper cooling before we leave.
Customer Training
We walk you through your new system, thermostat settings, and filter maintenance schedule.
Warranty Support
We register your equipment for the full manufacturer warranty and remain available for follow-up service.
D's Air Installation Standards — Every AC Job
- Manual J load calculation for proper equipment sizing
- Matched condenser and indoor coil — certified system combination
- Refrigerant charge verified by weight and superheat/subcooling measurement
- Electrical disconnect, breaker, and wiring per NEC and local code
- Condensate drain properly pitched, trapped, and tested
- Airflow measurement across the coil — CFM verified
- Thermostat wiring and cooling mode test
- City of Chicago permit pulled on every installation
- Equipment registered for full manufacturer warranty
- Customer walkthrough of new system and filter location
What Our Customers Say
Based on Google Reviews — D's Air & Heating, Inc.
Marcus T.
Furnace Replacement
"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."
Latoya W.
Boiler Repair
"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."
James R.
AC Installation
"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."
Ready to Work With Chicago's Trusted HVAC Company?
D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.
Request Coil Pricing
Contact D's Air & Heating for accurate RCFY coil pricing. We'll match the right coil to your system.
Get a Free Installation Estimate
To provide accurate pricing and equipment recommendations, please complete the estimate request form below. Our team will review your information and contact you with options, pricing, and next steps.
Or call us directly:
(773) 940-0965Book Now schedules your technician visit. A $95.35 Service Call Fee applies.
Authorized Ruud Dealer
D's Air & Heating, Inc. is a proud Authorized Ruud Dealer serving Chicago and surrounding communities. We provide professional Ruud furnace, air conditioner, heat pump, and complete HVAC system installation, replacement, repair, and maintenance services. As an Authorized Ruud Dealer, our technicians are trained to recommend, install, and service genuine Ruud equipment while helping homeowners maximize comfort, energy efficiency, and long-term reliability.
Ruud heating and cooling systems are recognized for their innovative technology, dependable performance, and energy-efficient operation. Whether you need a new Ruud furnace, central air conditioner, heat pump, or complete HVAC system replacement, D's Air & Heating, Inc. delivers expert installation, professional service, and trusted support. We help homeowners choose the right Ruud comfort solution while ensuring every system is installed according to manufacturer specifications and local code requirements.
Our experienced technicians are committed to providing quality workmanship, honest recommendations, and outstanding customer service backed by trusted Ruud manufacturer warranties. From routine maintenance and repairs to complete system replacements, D's Air & Heating, Inc. is your local source for professional Ruud HVAC services throughout Chicago and surrounding areas.
Contact D's Air & Heating, Inc. today at (773) 940-0965 to schedule your free estimate for Ruud cooling coil installation, replacement, maintenance, or repair services.
A $95.35 Service Call Fee is Required for All Service Appointments, Including Warranty Claims.