D's Air & Heating, Inc.
Boiler Services · Chicago, IL

Hot Water Boiler
Installation & Repair

Hydronic hot water boilers deliver smooth, consistent comfort through baseboards and radiators. D's Air & Heating, Inc. installs and services gas-fired hot water systems throughout Chicago.

IL License #2183457 · D's Air & Heating, Inc. · 549 N Monticello Ave, Chicago, IL 60624

🎉 Don't 'FREEZE' Call D's... · 15% Off With Maintenance Agreement

About Hot Water Boiler Systems

Hot water boilers circulate heated water through radiators or baseboards for smooth, consistent comfort. Unlike forced-air systems, hydronic heat doesn't dry out the air or distribute allergens — it simply warms the space quietly and evenly.

Modern hot water boilers offer excellent efficiency and long-term reliability. Zone valve integration allows different areas of the home to be heated independently, reducing energy waste and improving comfort.

D's Air & Heating, Inc. has been servicing Chicago hydronic systems since 2009. We handle everything from circulator pump replacements to full boiler installations with zone valve upgrades.

What We Install & Service

  • Gas-fired hot water boiler installation and replacement
  • High-efficiency circulator pump installation
  • Zone valve and thermostat integration
  • Baseboard and radiator compatibility — no ductwork required
  • Quiet, even heating throughout every room
  • Full permit pulling and Chicago code compliance

Our Hot Water Boiler Diagnostic Process

Every service call follows a structured diagnostic workflow — so you get an accurate diagnosis and upfront pricing before any work begins.

1

System Identification

Confirm boiler type, age, fuel type, and zone configuration.

2

Safety Check

Gas shutoff, pressure relief valve, expansion tank, and CO detector verification.

3

Visual Inspection

Boiler, piping, circulator pump, zone valves, and expansion tank inspection.

4

Operational Test

Ignition, burner flame, water pressure, and heat distribution through zones.

5

Diagnostics

Circulator pump, zone valves, pressure issues, and heat exchanger condition.

6

Options Presented

Repair vs. replacement vs. upgrade — with upfront pricing before any work begins.

Typical Pricing Ranges

Hot Water Boiler Replacement (standard)$4,200 – $7,500
Hot Water Boiler Replacement (high-efficiency)$6,500 – $11,000
Circulator Pump Replacement$350 – $650
Zone Valve Replacement$250 – $450 per zone
Expansion Tank Replacement$195 – $350
Pressure Relief Valve Replacement$195 – $350

All pricing includes labor, permits, and startup. Final price confirmed before work begins. Technical Visit — $95.35 · Don't "FREEZE" — Call D's!

What Chicago Homeowners Say

Clean and Professional Install

The new hot water boiler keeps every room comfortable. The install was clean and professional. Darryl explained everything.

Thomas W. — Irving Park

Zoned Heat Works Perfectly

Darryl installed zone valves and a new circulator. Every floor heats independently now. Huge improvement over the old system.

Linda C. — Avondale

No Heat in January — Fixed Fast

Circulator pump failed in the middle of winter. Darryl came out same day and had heat back on within hours. Highly recommend.

Kevin B. — Jefferson Park

Service Call Policy — D's Air & Heating, Inc.

The service call fee covers travel and full diagnostics only.
The service call fee is not deducted from the total cost of any repair or installation.
After diagnostics, we provide clear repair or replacement options with upfront, itemized pricing.
Once you approve the Maintenance Agreement, your 15% discount becomes active and is automatically applied to the repair or installation estimate.
The 15% discount does not apply to the initial service call fee.

Hot Water Boiler Issue? Call D's Air.

D's Air & Heating, Inc. · (773) 940-0965 · dsairheating@gmail.com · IL License #2183457

Chicago Heating & Cooling Done Right.  ·  Don't ‘FREEZE’ Call D's...

Why Chicago Homeowners Trust D's Air & Heating

Licensed & Insured

IL License #2183457

Serving Chicago

Since 2009

Authorized Dealer

Multiple Brands

No Contracts

Ever — Guaranteed

Permit Pulled

Every Installation

Professional Standards

Code-Compliant Work

EPA Certified

Mainstream Engineering

R-410A Certified

Mainstream Engineering

Why Choose D's Air & Heating, Inc.?

Chicago's trusted HVAC company since 2009 — licensed, insured, and committed to honest workmanship on every job.

Experience Since 2009

D's Air & Heating has served Chicago homeowners and businesses since 2009. Over 15 years of local HVAC experience means we've seen every type of system, every Chicago building configuration, and every challenge the city's climate presents.

Manufacturer-Trained Technicians

Our technicians receive ongoing manufacturer training and certification. We install Lennox, Goodman, Amana, Daikin, Sinclair, Weil-McLain, Peerless, and other leading brands — and we know each system inside and out.

Licensed, Insured & Permitted

D's Air & Heating holds Illinois HVAC License #2183457 and carries full liability insurance. We pull City of Chicago permits on every installation — protecting you legally and ensuring the work meets code.

Honest Recommendations

We tell you what you need — not what generates the highest invoice. If your system can be repaired cost-effectively, we'll say so. If replacement makes more sense, we'll explain exactly why. No pressure, no upselling.

Local Chicago Expertise

We know Chicago's housing stock — two-flats, greystones, bungalows, vintage buildings with steam heat, modern construction with forced air. We size and install equipment for the specific demands of Chicago homes and Chicago winters.

Long-Term Customer Support

Our relationship doesn't end at installation. We register your equipment for warranty, remain available for follow-up questions, and provide ongoing maintenance to keep your system running at peak efficiency for years.

What Chicago Homeowners Should Know About Boiler Installation

How a Hot Water Boiler Works

A hot water (hydronic) boiler heats water and circulates it through pipes to radiators, baseboard convectors, or radiant floor tubing. The water returns to the boiler, is reheated, and recirculates. Modern condensing boilers achieve 90%+ efficiency by recovering heat from exhaust gases that older boilers waste.

Steam vs. Hot Water Boilers

Steam boilers — common in Chicago's older two-flats and greystones — heat water until it becomes steam, which rises naturally through pipes to cast-iron radiators. They require no circulator pump but need precise water level control. Hot water systems are quieter, more efficient, and easier to zone. D's Air installs and services both.

Boiler Sizing and Near-Boiler Piping

Correct boiler sizing requires calculating the heat loss of every room in the building. Oversized boilers short-cycle and cause water hammer in steam systems. Proper near-boiler piping — header design, equalizer pipe, Hartford Loop for steam — is as important as the boiler itself. D's Air follows manufacturer piping diagrams and ASHRAE guidelines on every installation.

Combustion Safety and Venting

Every boiler installation requires proper combustion air supply and flue venting. Inadequate combustion air causes incomplete combustion and carbon monoxide production. Improper venting allows flue gases to back-draft into the living space. D's Air verifies combustion air, draft, and CO levels on every installation.

What to Expect From Your D's Air Boiler Installation

1

Free Estimate

We inspect your existing system, measure your building, and provide a written quote covering equipment, labor, and permits.

2

Equipment Selection

We recommend the right boiler type (steam, hot water, condensing, combi) and brand for your building and budget.

3

Installation Day

Our crew protects your space, removes the old boiler, installs the new system with proper piping, and cleans up completely.

4

Startup & Testing

We fill the system, purge air, test all safety controls, verify gas pressure, and confirm proper heat distribution.

5

Customer Training

We explain your new boiler's controls, how to check the water level (steam systems), and what maintenance is needed.

6

Warranty Support

We register your equipment and remain available for follow-up service and annual maintenance.

D's Air Installation Standards — Every Boiler Job

  • Heat loss calculation and proper boiler sizing
  • Near-boiler piping per manufacturer specifications
  • Hartford Loop installation on all steam systems
  • Backflow preventer and expansion tank on all hot water systems
  • Gas line pressure test and leak check at all connections
  • Flue venting verification — draft, clearances, and termination
  • Low-water cutoff test and safety control verification
  • Combustion analysis and CO test after startup
  • City of Chicago permit pulled on every installation
  • Equipment registered for full manufacturer warranty

What Our Customers Say

4.6 / 5.0

Based on Google Reviews — D's Air & Heating, Inc.

M

Marcus T.

Furnace Replacement

"D's Air & Heating did an outstanding job replacing my furnace. Darryl was professional, on time, and explained everything clearly. The installation was clean and the system works perfectly. Highly recommend."

Verified Google Review
L

Latoya W.

Boiler Repair

"Called D's Air when my boiler stopped working in January. They came out the same day, diagnosed the problem quickly, and had it running again within hours. Fair pricing and excellent service."

Verified Google Review
J

James R.

AC Installation

"Installed a new central AC system for us this summer. The crew was respectful of our home, cleaned up after themselves, and the system runs quietly and efficiently. Very satisfied."

Verified Google Review

Ready to Work With Chicago's Trusted HVAC Company?

D's Air & Heating, Inc. — Serving Chicago Since 2009. Licensed, Insured, No Contracts.

📅 Book Online📞 Don't Freeze — Call D's!🚨 Need Help ASAP?Same-Day HVAC Service Available